Welcome to Jiangsu Shengman Drying Equipment Engineering Co., Ltd.

Set Homepage Favorites Contact


▶ Regular Drying equipment

▶ Advantages engineering

▶ Granulating coating equipment

▶ Mixing & crushing equipment

▶ Heating & dust removal

▶ Other equipment






Changzhou Zhenglu town industrial area



Annual production capacity exceeding 100 million yuan

LPG series High speed centrifugal spray drier

Overview Description

Spray drying is the most widely used process in liquid process forming and drying. It is suitable for the production of powdered, granular solid products from solutions, emulsions, suspensions and pasty liquid starting materials. Therefore, spray drying is a very desirable process when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet the exact criteria.



Drying Series Dryer Series

The air is filtered and heated to enter the top air distributor of the dryer, and the hot air is evenly inserted into the drying chamber in a spiral form. Liquid material through the top of the tower at the top of the high-speed centrifugal atomizer, (rotating) spray into a very fine mist of liquid beads, and hot air in parallel contact in a very short period of time can be dried for the finished product. The finished product is continuously discharged from the bottom of the drying tower and the cyclone, and the exhaust gas is drained by the fan.



● Drying speed, the material by atomization, the surface area greatly increased in the hot air flow, the instant can evaporate 95% -98% of the water, complete the drying time only a few seconds, especially for heat-sensitive materials dry.

● products with good uniformity, mobility and solubility, product purity, good quality.

● The production process is simplified and the operation and control are convenient. For the wet content of 40-60% (special materials up to 90%) of the liquid can be dried into a powder product, dry without grinding and screening, reduce production processes and improve product purity. The product size, bulk density, moisture, within a certain range can be changed by changing the operating conditions to adjust, control and management are very convenient.

24 hours free calls:


General Manager's Office: +86-519-81235888

Contact: Ms. Lu

Sales Engineering Department: +86-13358165818

Fax: +86-519-81083912

Address: Zhenglu Town, Changzhou City Industrial Zone






Home | About us | News | Products | Cases | Selection | Jobs | Contact | 中文版

Copyright(C)2017, Jiangsu Shengman Drying Equipment Engineering Co., Ltd. All Rights Reserved. Supported by Toocle Copyright Notice