Welcome to Jiangsu Shengman Drying Equipment Engineering Co., Ltd.

Set Homepage Favorites Contact

NEWS

▶ Company news

▶ Industry news

CONTACT

4008812289

+86-519-81083912

sales@smdryer.com

2853280978@qq.com

Changzhou Zhenglu town industrial area

 

NEWS

Annual production capacity exceeding 100 million yuan

Operation Rules of Jiangsu Shengman Dry Double - cone Rotary Vacuum Dryer

 

Jiangsu Sheng Man Drying Equipment Engineering Co., Ltd. double cone rotary vacuum dryer operating procedures before driving check: a, open the vacuum pump check, pipe connections, packing material is leaked, inlet and outlet sealing is good, vacuum table reaction is sensitive The B, open the cooling water valve check the heat pipe connection, packing material is leaked, pressure gauge reaction is sensitive. C, check the electronic control cabinet of the instrument, buttons, light is normal, check the ground wire is good, with or without leakage, short circuit exists. D, in the oil cup filled with grease, start the motor empty car operation, listening to the noise is normal, if not normal, should check out the source of noise, and be excluded. The dry material is added to the container (powdered, fine granulate, vial material with vacuum feed), and then close the feed hole cover. 3, close the vacuum valve, open the vacuum pump, so that the dry container was negative pressure (600 - 755 mmHg). Turn on the power switch, start the motor, press the work button, the dryer starts to rotate. Open the heating body valve, so that the heating medium into the dry container sandwich, according to process requirements test. After the material is dry, close the heating valve, and then into the sandwich within the cooling water, until the material cooled to room temperature, stop the vacuum. Open the vacuum valve, turn off the motor, stop the dryer rotation, open the hole cover out of the material.

24 hours free calls:

4008-812-289

General Manager's Office: +86-519-81235888

Contact: Ms. Lu

Sales Engineering Department: +86-13358165818

Fax: +86-519-81083912

Address: Zhenglu Town, Changzhou City Industrial Zone

E-mail:sales@smdryer.com

E-mail:2853280978@qq.com

Website:www.jssmdrying.com
www.smdryer.com

E-mail

LINKS

Home | About us | News | Products | Cases | Selection | Jobs | Contact | 中文版

Copyright(C)2017, Jiangsu Shengman Drying Equipment Engineering Co., Ltd. All Rights Reserved. Supported by Toocle Copyright Notice